1/25 & 1/24 scale rulers

[bitner1970]

One thing that you can use if you cannot find the actual rulers for 1/25 and 1/24 is use a metric ruler for 1/25th scale. 1"=25.4mm, so it is almost spot on for 25th, and also you can get metric rulers cheap anywhere. For 1/24, use an architecture scale, 1" = 2'. Both of these should be available anywhere for probably a lot cheaper than the actual thing.

Cheers:

Bill

[slurrydog]

Thanks Bill, that is a great tip.
Dave