|
|
Post by calscustoms on Nov 6, 2011 8:11:24 GMT -8
|
|
|
|
Post by slurrydog on Nov 6, 2011 9:10:58 GMT -8
Looking good so far, I like that shade of green.
Dave
|
|
|
|
Post by Muleskinner on Nov 6, 2011 10:04:56 GMT -8
Goob start. Why nt go with a flat bed or chip van or something on tht nature?
William
|
|
|
|
Post by calscustoms on Nov 6, 2011 11:14:23 GMT -8
thats a good idea
|
|
|
|
Post by calscustoms on Nov 6, 2011 11:19:18 GMT -8
For a chip trailer i should be able to start with a extioror post van and do some mods to it, right? Cal I'm thinking something like this,    |
|
|
|
Post by Muleskinner on Nov 6, 2011 12:05:01 GMT -8
The AMT exterior post Van would be a good starting point for this van. They were also made by Peerless and had the rounded type front on them like the Kit has. I would venture into either one of those type if you are going to make a Chipper for the rig. wouls look great. Alot of these type vans had two piece flip over screens on the top to keep the load from blowing out of the top.
William
|
|
|
|
Post by Ryan Rønning on Nov 7, 2011 10:23:01 GMT -8
That would be a great trailer.
|
|
;D 
