|
Post by danmodels on Jul 21, 2012 6:58:24 GMT -8
|
|
|
Post by Muleskinner on Jul 21, 2012 10:52:49 GMT -8
Coming along nicely. Gonna be a nice unit when completed.
|
|
|
Post by ap40rocktruck on Jul 21, 2012 11:14:49 GMT -8
very nice, although the chassis looks a bit short.
Ap40
|
|
|
Post by danmodels on Jul 21, 2012 11:45:41 GMT -8
|
|
|
Post by ap40rocktruck on Jul 22, 2012 4:57:44 GMT -8
That truck with the Cummins is a natural for a tandem axle dump or concrete truck... so many ideas of what to build.
Ap40
|
|
|
Post by danmodels on Jul 22, 2012 10:23:22 GMT -8
In this case what engine have the schort chassis tractor with two axles ? The Cummins V8-903 ? Dan
|
|
|
Post by plastictrucker on Jul 22, 2012 11:33:03 GMT -8
In this case what engine have the schort chassis tractor with two axles ? The Cummins V8-903 ? Dan A cummins 555 would be better,its a predecessor to a 903.In my opinion the cummins you have pictured is absolutely fine weather single or tandem drive
|
|
|
Post by ap40rocktruck on Jul 22, 2012 15:43:17 GMT -8
In this case what engine have the schort chassis tractor with two axles ? The Cummins V8-903 ? Dan A cummins 555 would be better,its a predecessor to a 903.In my opinion the cummins you have pictured is absolutely fine weather single or tandem drive Very good point. The best part is the triple nickle & the 903 are exactly the same dimensions on the outside. most 555's were non turbo. When they built the 903, they just stroked the crank & stuffed in the biggest set of liner kits they could. The 903 is still in production for gen set & ag use. Ap40
|
|
|
Post by danmodels on Jul 22, 2012 22:45:43 GMT -8
Please Do you help me with same photos of 555 or/and 903 to can make a good engine model ? Dan
|
|
|
Post by ap40rocktruck on Jul 23, 2012 1:13:13 GMT -8
Please Do you help me with same photos of 555 or/and 903 to can make a good engine model ? Dan Dan, I will scan & post what i have. Spec sheets, installation drawings. I think i have photos of the 555. You could also find one of the old ERTL IH 4200 (short hood, molded in light blue) as that was the only kit to have the Cummins 903 in it. Ap40
|
|
|
Post by danmodels on Aug 17, 2012 6:20:55 GMT -8
|
|
|
Post by danmodels on Sept 4, 2012 5:02:47 GMT -8
Hello Today i was post on E-bay.com the resin kit Ford N 950 Cab at this No . 221120125275 All the best Dan
|
|
|
Post by golp8100 on Dec 27, 2012 4:57:43 GMT -8
Hello dude,thats great work done 1/25 scle project..its looking too much pretty and struggle to make it easily seen by the photo but one thing i noticed that its bumper is very different to all the ford models which is amazing for me...
|
|
|
Post by danmodels on Feb 17, 2013 4:05:20 GMT -8
|
|
|
Post by danmodels on Feb 17, 2013 4:17:31 GMT -8
|
|