|
Post by Muleskinner on Jul 17, 2013 8:34:52 GMT -8
Gator,
I spray the model first with Enamel paint for the base color in this case yellow, then while it is still tacky, I use the secondary color (black) which is acrylic and brush it over the yellow. The acrylic will begin to separate as it dries and creates the crackling effect which you see on the model. I will do this sometimes when I want to represent dried and cracking mud on a model also as with some of my Cat models.
You can get some really nice effects with this technique but it is best to try it on some scrap plastic before applying the technique to a model. Remember always use the enamel first and then brush over it with acrylic. I tired it in reverse and ended up with a mess.
|
|
|
Post by dptydawg on Jul 18, 2013 10:22:34 GMT -8
This is another fine replica that you have mastered, William. If I'm reading this right the tractors brakes were at the mercy of the weakest link in the drive chain? Seems like a bit of a nail biter. Carl
|
|
|
Post by Muleskinner on Jul 18, 2013 20:56:29 GMT -8
Carl, nail biting was common back in the prehistoric days of logging!!!!!
|
|
|
Post by plastictrucker on Jul 22, 2013 17:29:16 GMT -8
very,very nice.Can you show us the chain drive?
|
|
|
Post by Muleskinner on Jul 22, 2013 18:27:53 GMT -8
Here are a few shots of the Reliant Log Trailer which I built for this model. Rear of trailer showing the overly long timber reach. The red flag is made from tissue paper and brass wire. Another shot of the trailer. Shot showing the Link and Pin setup with trailer connected to the unfinished rig.
|
|
|
Post by gatorincebu on Jul 23, 2013 6:35:44 GMT -8
That is just too cool. Your weathering just is too much, it looks so good!
Be Well Gator
|
|