|
Post by darkness21 on Nov 22, 2013 7:06:38 GMT -8
thank you fellow modelers i wish i could have done a much cleaner job this build going to resort to weathering it to hide the flaws and learn from it and work on my building skills.
|
|
|
Post by darkness21 on Nov 22, 2013 17:28:33 GMT -8
Well have to stop at this point of the project waiting for parts to be available plow hitch wing plow,plow to complete the frame.
|
|
|
Post by darkness21 on Nov 26, 2013 14:02:25 GMT -8
updates sand spreader almost finished frame assembled need to finish the cab then weather it all be a bit until the plows are in.
|
|
|
Post by darkness21 on Nov 26, 2013 14:03:09 GMT -8
|
|
|
Post by darkness21 on Nov 26, 2013 14:03:44 GMT -8
|
|
|
Post by darkness21 on Nov 26, 2013 14:04:21 GMT -8
|
|
|
Post by darkness21 on Nov 26, 2013 14:05:16 GMT -8
|
|
|
Post by darkness21 on Nov 26, 2013 14:09:33 GMT -8
|
|
|
Post by ap40rocktruck on Nov 26, 2013 14:53:57 GMT -8
One small thing, the wheels you have are ALL WRONG, those are for a non-drive steer axle. No drive hub in the front & on a Mack RM the single rear wheel should be a outer dual wheel with a Mack drive hub.
Ap40
|
|
|
Post by darkness21 on Nov 26, 2013 16:29:17 GMT -8
|
|
|
Post by darkness21 on Nov 26, 2013 16:37:22 GMT -8
this was the pic i used for my project, thank you Rick arrrrr wrong wheels it can be fixed Dave should have set of new wheels to make it right. Hey adds to the fun of modeling.
|
|
|
Post by darkness21 on Nov 26, 2013 17:08:18 GMT -8
This combination should work better well i'm on the right tract.
|
|
|
Post by darkness21 on Nov 26, 2013 19:04:01 GMT -8
Fixed the front wheels now i need to pic a set out for the rear of the truck.
|
|
pacificed
CHOKER SETTER
Pacific, Hayes, KW, Mack, and Challenger is where it's at!
Posts: 71
|
Post by pacificed on Nov 29, 2013 8:57:04 GMT -8
Did I read it right when you said the cab and snow spreader are from AITM?
I must be blind as I don't see these items on their website. I like that RM600 cab.
|
|
|
Post by darkness21 on Nov 29, 2013 15:34:31 GMT -8
oh yes i purchased it from Dave at A.T.I.M he may not have them posted yet best i can tell you is email him and inquire on it.
|
|