|
Post by rnagle on May 13, 2012 15:21:22 GMT -8
|
|
|
Post by gator on May 13, 2012 18:32:58 GMT -8
That is cool!!!!
Gator
|
|
|
Post by ap40rocktruck on May 14, 2012 4:40:08 GMT -8
WOW, All that detail just pops! and the bolt heads......NICE.
Looking great,
Ap40
|
|
|
Post by Joris Scholte on May 14, 2012 10:41:09 GMT -8
Looks excellent as always Robert!
|
|
|
Post by Muleskinner on May 15, 2012 15:02:36 GMT -8
Looking better and better all the time.
|
|
|
Post by rnagle on May 21, 2012 13:52:28 GMT -8
Red paint on the cab this weekend, now "no touch" for a week+!
|
|
|
Post by Muleskinner on May 21, 2012 15:52:38 GMT -8
That is going to look sharp. The gray really accents the red in combination. I reaaly like it a lot.
|
|
|
Post by Joris Scholte on May 22, 2012 6:55:30 GMT -8
Very nice! the red looks good on the grey frame.
|
|
|
Post by rnagle on Jul 22, 2012 15:54:10 GMT -8
|
|
|
Post by ap40rocktruck on Jul 22, 2012 17:01:51 GMT -8
Robert,
That is awesome! now you can really see the difference of using the front cab mounts from the KW areodyne COE on the re-issued K-100.
Thanks for the update. Will there be a heavy trailer to go with?
Ap40
|
|
|
Post by Joris Scholte on Jul 23, 2012 9:26:30 GMT -8
The motor looks great in the KW Rob!
|
|
|
Post by rnagle on Jul 23, 2012 13:04:56 GMT -8
Thanks guys, trailers are planned (eventually) for this one, I have two photos from Hank's Truck Pictures site with B-train tanker sets - these tractors were spec'd for that application. That will be a b-i-g project as tanks aren't a close match to any of the readily available kits.
|
|
|
Post by Muleskinner on Jul 23, 2012 13:44:09 GMT -8
Lookin good Robert. Great Project.
|
|
|
Post by rnagle on Jul 28, 2012 16:52:59 GMT -8
Thanks William, currently working on intake plumbing. Kit parts weren't going to work for this application so 1/4" styrene tube used, a number of small segments cut & cemented form the basic elbow, once sanded smooth .010 x .040 and .010 x .030 strips cemented on for the ribs. 7/32" styrene tube used for the aluminum piping:
|
|
|
Post by Joris Scholte on Jul 29, 2012 0:42:40 GMT -8
Hard work, but rewarding! Looks good Rob!
|
|